Beams: Steel beams are engineered support elements that can very greatly in the load they can carry and the tension and torque they can withstand. Our beams are cut to size and prime coated.
Lintels: Lintels, better known as headers, are the spanning component that goes across the top of window and door openings. Steel lintels are a replacement material for a typical wood installation. Steel lintels have the ability to carry equal amounts of weight while taking up less space. Steel lintels are stronger than wood and are easily formed to curved openings. They are used in construction where door and window openings are installed with a deeper set back in brick veneer. Our lintels are cut to size and prime coated.
Rebar: A rebar (short for reinforcing bar), also known as reinforcing steel, is a common steel bar, used as a tensioning device in reinforced concrete and reinforced masonry structures holding the concrete in compression. It is usually formed from carbon steel, and is given ridges for better mechanical anchoring into the concrete.
Columns: A structural element that transmits, through compression, the weight of the structure above to other structural elements below.
Angles: Angle steel can be composed into different bearing components with different structures, it can also be used as joint pieces between the components. Angle steel is mainly used in a variety of construction structures and engineering structures such as factories, bridges and vehicles.
HSS Tubing: HSS or Hollow Structural Sections tubing is high-strength welded steel tubing used as structural elements in building construction.
Flats & Rounds
Wire Mesh: Wire mesh can be used for a wide range of applications. Woven into a criss-cross mesh pattern that is often very small, the mesh is normally very strong and will hold up in many different environments.
Plates: Base plates transfer column loads to the supporting member or foundation. They allow the column to stand as a temporary vertical cantilever after the lifting line is released and must withstand temporary wind and erection loads safely.
Decking Material: Metal decking is used in a wide variety of commercial and industrial applications. It includes steel roof and floor decking, aluminum floor decking, and acoustical metal decking. Metal decking typically has a ribbed or corrugated profile that is achieved through a process called roll forming.